Medi-Purge™ "Medical Gas Industries Only Purging Tool For Medical Gas Outlets / Inlets"      

          part # MP-E (Amico®, BeaconMedaes®, Ohio Medical®, Gentech®, etc)

 
step #1                                                                                       step #2
place Medi-Purge™ base onto outlet / inlet                        if necessary, hold the base in place with 2 screws provided
                                                                                                     (only needed on non-ferrous outlets or to secure the NF nitrogen
                                                                                                     hose better) 
                               
                               

step #3                                                                                       step #4
screwing the Medi-Purge™ plunger into the                      NF nitrogen will now flow out of the Medi-Purge™. An oxygen     
base depresses the outlets secondary check                  analyzer (per NFPA-99) can be placed in the 1/4" hole,
                                                                                                    to ensure all air has been expelled
                                 
                   


step #5
if desired, an NF nitrogen hose can be screwed
onto the 1/4" NPT connection allowing NF nitrogen
 to flow into the outlet / inlet (if necessary, the Medi-Purge™
can be held securely in place with the 2 screws provided)



 

John Sterling, Inc. - Hebron, KY - (859) 586-2971